Walker Rider Lawnmowers MBSSD, Owner'S Manual

Page: 66 / 84

ITEM PART DESCRIPTION NO.
NO. NO. REQ’D
ITEM PART DESCRIPTION NO.
NO. NO. REQ’D
Use only genuine Walker
®
replacement parts. Effective Date 03-31-08
62
MAIN COMPONENT POWER TRANSMISSION
PTO Drive Assembly
1 4850 Handle Grip 1
2 2358 Clutch Lever (Includes Item # 1) 1
3 5830-4 Grease Fitting (90 Deg.) 1
4 5214-2 Ball Joint (5/16-24) (Nylon Lined) 2
5 4358-1 Clutch Rod 1
6 5229 Extension Spring (1/2 x 2-1/4) 1
7 2358-5 Clutch Actuator 1
8 5103-2 Pivot Bushing (5/16 ID) 2
9 2358-6 5/16-18 x 1-3/4 Stud 2
10 2349-2 Bearing Mount Plate 1
11 2349-3 Switch Pivot Mount 1
12 7407 Clevis Pin (3/16 x 1/2) 2
13 2358-4 Clutch Actuator Link 2
14 4358-5 Clutch Linkage Spring 1
15 2236 PTO Pulley 1
(Includes Items # F075, F114 & F435)
16 5268 Bearing W/Collar (3/4) 2
17 2274-6 PTO Drive Shaft (1") 1
2274-5 PTO Drive Shaft Assembly
*
18 7275-9 Quick Coupler Installation Tool
**
19 7275-16 Universal Joint Tube Assembly / Spline 1
20 2274-7 PTO Bearing Housing 1
21 4325-3 Clutch Stop 1
22 2325-1 Clutch Retainer 1
23 2325-4 Idler Adjustment 1
24 2265 Bearing (20mm) 4
25 2406-7 Pivot Shaft Spacer 1
26 2236-1 Idler Pulley (4.5/AAA) 2
27 7201-7 Inner Race (2-5/8) 1
28 7201-3 DU Bearing 2
29 2230 Engine PTO Belt/Set (3) 1
30 2236-4 Idler Pulley Shaft 1
31 2325-3 Idler Adjuster 1
32 2325-2 Tensioner Bolt 1
33 5830-3 Grease Fitting (45 Deg.) 1
34 2325 Idler Arm (Includes Item # 33) 1
35 5841 Retainer Washer (3/8 x 1-1/4) 1
36 2410 Mechanical Clutch 1
Fasteners
F004 1/4-20 Keps Nut 5
F008 5/16-24 Keps Nut 2
F009 5/16-18 Whiz Locknut 12
F012 3/8-16 Keps Nut 1
F013 3/8-16 Whiz Locknut 3
F020 5/16-18 ESNA Nut 1
F024 5/16-24 Jam Nut 2
F029 1/4-20 x 1/2 Hex Bolt 1
F031 1/4-20 x 5/8 Hex Bolt 5
F034 5/16-18 x 3/4 Hex Bolt 5
F046 3/8-16 x 3-1/2 Hex Bolt 1
F091 5/16-18 x 5/8 Hex Bolt 1
F093 5/16-18 x 1 Hex Bolt 4
F114 5/16-18 x 5/8 SQH Set Screw 1
F127 1/16 x 1/2 Cotter Pin 2
F163 5/16-18 x 3/4 SQH Set Screw 1
F168 5/16 Split Lock Washer 1
F170 5/16 x 1 x 7/64 Flat Washer (Zinc Plate) 1
F178 1/4 x 1 Fender Washer 1
F185 1/4 Int. Star Lock Washer/SS 1
F241 .375 x .875 x .10 Washer 2
F336 3/8-16 Jam Nut 1
F388 3/8-16 x 2-1/2 Hex Bolt 1
F435 1/4 x 1/4 x 1-1/4 Key 1
*
Service Part Only
**
The Quick Coupler Installation Tool is used to assist the
installation of the Quick Coupler Tube and PTO Shaft connec-
tion by holding the disconnect ring in the retracted position
when joined to the tractor spline shaft on the PTO Drive
Shaft.