Operating Instructions
30
ADJUSTING CUTTING HEIGHT
Cutting height is adjusted from operators seat using
the height peddle to assist in raising the deck while
positioning the height adjustment lever and hitch
pin.
1.
Disengage PTO and stop tractor.
2.
Push down on height peddle until it latches in the
full up position.
3.
Select desired height by moving the hitch pin to
the desired height.
4.
Push down on the height peddle and lift up on
the height adjustment lever. Slowly release the
height peddle while lifting the lever until there is
no pressure on the peddle.
Cutting Height Adjustment
Transport Position
1.
Disengage the PTO.
2.
Push down on height peddle until it latches in the
full up position.
Cutting Height Adjustment Components
WARNING
Never adjust cutting height while the
mower is moving. Before adjusting
cutting height or servicing,
move the
Forward Speed Control (FSC) into the
NEUTRAL-PARK position, engage the
parking brake, and disengage the blade
clutch (PTO). Tractor should not be
moving while adjusting cutting height.
Height
Adjustment Lever
Hitch Pin
Height Peddle
