47
3.
Tip Adjustment:
a.
Ensure that the unit power source cannot start
up. Lock-out tag-out power source.
b.
Lift the receiver tank off the airlock.
c.
Loosen tip from rotor.
d. Raise tip up and tighten bolts.
e.
Rotate the airlock and watch to make sure tip
bends back slightly as it rotates into housing.
f.
Repeat procedure with other tips.
g.
Install tank top.
h. Install belt/chain cover.
6.
Tip Replacement:
a.
Ensure the unit power source can not start
up.
b.
Lift the receiver tank off the airlock.
c.
Remove the tips from the rotor.
d. Mount the tips to their respective vane and
tighten bolts finger tight.
e.
Rotate the airlock and watch to make sure tip
bends back slightly as it rotates into housing.
f.
Repeat procedure with other tips.
g.
Tighten all fasteners to their specified torque.
h. Install tank top.
i.
Install belt/chain cover.
FIG. 34 TIP ADJUSTMENT
Airlock
Schematic
Summary of Contents for Agri-Vac 3510
