•
Turn the reflector anticlockwise as far as it will go and take off from the
device.
Mount on tripod (optional)
A
Tripod mount
B
Fastening screw
•
Open the fastening screw.
•
Mount the device on the tripod.
•
Tighten the fastening screw.
6.3.
Ring Flash RD-600
A
B
C
Fastening screw for height adjustment
Fastening screw for depth adjustment
Fastening screw for tripod and camera mounting
•
Open the fastening screw for adjusting the height.
•
Adjust the desired height.
•
Tighten the fastening screw.
•
Open the appropriate fastening screw for adjusting the depth.
•
Put the device in the desired position.
•
Tighten the fastening screw.
•
For mounting the device on a tripod and on your camera, open the
appropriate fastening screw.
•
Take your tripod or camera and tighten the fastening screw.
•
If you would like to use the diffusor, you can put it on the Ring Flash.
WARNING Select a tripod of suitable weight and dimensions. See
Technical Specifications
.
WARNING Make sure, that your camera is mounted sturdily and securely
before every use. Check all fastening screws.
7.
Connect to power supply
A
B
Plug for flash devices
Protection cap for plugs
•
Switch off device.
See
Switch the device on and off
.
•
Screw on protection caps.
A
C
A
B
15
14
B
B
A