background image

 

 

1.2.

 

Markings in this manual 

Marking 

Meaning 

 

Indicates the handling and consequences of safety 
notes.  

 WARNING 

Indicates a hazardous situation, which, if not avoided, 
could result in a 

serious

 injury or 

death

.  

 

CAUTION

 

Indicates a hazardous situation, which, if not avoided, 
may result in 

minor

 or 

moderate

 injury.  

ADVICE: 

Indicates potentially physical damages and other 
important information in connection with your device.  

2.

 

Important safety notes 

 WARNING 

Risk of eye injury 
The flash light could affect the retina to blindness, if a flash is triggered in 
the near of persons and animals.  

 

Don´t flash the device close to persons and animals.  

 

Make sure, that persons and animals have at least 2m distance to the 
device. Please avoid persons and animals looking into the flash directly.  

 WARNING 

Danger of crashing, entrapment and fire through the falling down of the 
device 
The weight of the Powerpack is approx. 3,9kg, the weight of the charger 
approx. 0,48kg, the weight of the battery approx. 1,3kg, the weight of the 
Ring Flash approx. 1,1 kg and the weight of the Flash Light is approx. 1,6 kg. 

The modeling lamp, the flash tube and the reflector can heat up up to 
240°C.  

 

Make sure, that the device is always positioned tilt and skid resistant 
and stored securely. 

 

 

Keep out of reach of children and animals. They could overturn the 
device. 

 

 

Avoid placing cables where they can be tripped over. The device could 
be overturned. 

 

 

Select a tripod of suitable weight and dimensions. See Technical 
specifications. 

 WARNING 

Danger of electric shock, burn hazard 
Please note, that the device is still connected with the supply voltage even 
if it is switched off. Just after disconnecting the device from the power 
supply through pulling out the power cable, the device is actually de-
energized.  

 

Switch off your device when it is not in use. 

 

Switch off your device before mounting and maintenance and 
disconnect from power supply.  

 

Discharge your device before maintenance. 

 

Protect your device against unintended switching-on.  

 

Unplug the power cord, if the device is not in use for a long time.  

 WARNING 

Danger of electric shock, fire through short-circuit 
A short-circuit could be caused through defect cables and through humidity 
or moisture. A short-circuit can warm up the conductors, so that there 
isolation will melt or even melt thoroughly. This could lead to fire.  

 

Please just use the original cables, which are included in delivery. They 
are aligned for your device and guarantee the necessary safety for you 
and your device.  

Summary of Contents for RD-600













Reviews: