42
9. Troubleshooting
Problem
Possible cause
Remedy
The Power Station GX
is switched on, but
does not show any
function
The Power Station GX
is not or only insuffi
-
ciently charged
Recharge the Power
Station GX. Replace
the powerpack.
The Power Station GX
is switched on, char-
ged, but does not show
any function
100A fuse defective
Have the fuse replaced
by a skilled electrician.
(Before replacing:
Interrupt the power
supply by disconnec-
ting the control unit
from the battery)
The contact pins of
the upper device unit
do not contact the
powerpack.
Turn the upper device
unit around on the
powerpack
The Power Station GX
is defective
Consult the customer
service of Foto Walser
Power Station – does
not function reliably
The switch for the cor-
responding operation
has not been set
Set the switch to
Normal/Continuous
operation or Flash fun-
ction (flash operation),
as required
The display of the bat-
tery charge condition
only lights very dim
Power Station GX is
not or only insufficiently
charged
Recharge the Power
Station GX
Summary of Contents for power station gx
Page 1: ...Gebrauchsanleitung Instruction Manual Power Station GX...
Page 86: ...86...
Page 87: ...87...
