walimex power station gx, Instruction Manual

Page: 38 / 88

38
6.2. Connecting the device to the Power Station GX
WARNING
Pay attention to the safety notes on page 28-32.
• Depending on the type of use you should set the mode switch on the
Power Station GX to continuous operation “Normal”, e.g. when used with
a Daylight, or to flash operation “Flash”.
• Connect the mains cables of the devices to be used to the jack on the
Power Station GX.
• Switch on the Power Station GX on with the On/Off switch.
• For use with USB-devices – Operate the On/Off switch to position II –
USB.
CAUTION
Ensure a correct USB socket for using or charging your device. DC 5V
2000 mA / DC 5V 1000 mA / DC 5V 500 mA. Read the operating instruc-
tions of the manufacturer of your device before use.
NOTE
You can either use the AC or the USB-function. Parallel use is not possible.
Battery status display Powepack Power
LED flickering red <10.7 or >15.4 V
LED light red 10.7 ~ 11.2V
LED lights orange 11.2 ~ 12.3V
LED lights geen 12.3~14.6V
LED flickering orange 14.6~15.4V