38
39
•
Turn the control knob <Push for Menu> (11) to set the desired color temperature.
•
The color temperature can be set in steps of 100 Kelvin from 3,200 to 5,600 Kelvin.
•
The color temperature value is adjusted, saved and shown on the device display immediately
after turning the selection knob.
•
By briefly pressing the <<Push for Menu> (11) button again, you can also save the set values
and go to the other operating modes
8.4 Setting the remote - control channel on the device
8.4.1 Setting the remote - control channel on the Niova 60 Plus Bi Color device
•
Switch the device on with the ON/OFF switch (9) (if not already done).
•
Depending on the last selected functionality (the lamp has a memory function) the status
shows status LED blue (D), LED orange (C) or NONE of both status LEDs (display is blinking).
•
If the display is blinking, the device is already in the channel selection menu.
•
If not, press and hold the control knob <Push for Menu> (11) to set the channel selection mode.
•
The display starts blinking and displays the channel set on the device.
•
Turn the control knob <Push for Menu> (11) to set the desired channel.
• Channels from 1 to 99 can be selected.
•
The adjusted channel is saved and shown on the device display immediately after turning the
selection knob.
•
By briefly pressing the <<Push for Menu> (11) button again, you can also save the set values
and go back to the other operating modes.
•
If you do not accept the channel manually, the set channel is automatically saved after 5
seconds and the device automatically returns to standard operating mode.
8.4.2 Setting the remote - control channel on the Niova 100 / 200 Plus Daylight devices
•
Switch the device on with the ON/OFF switch (9) (if not already done).
•
Depending on the last selected functionality the brightness mode (display is NOT blinking) or
the channel selection mode (display is blinking) is displayed.
•
If not the channel selection mode is set, briefly press the menu selection button (21) on the
control panel once. Each time you press the Menu Select button (21), you can switch between
the two modes.
•
Set the channel selection mode, the display is blinking
•
The selected channel is shown on the device display.
•
Press the Plus <+> (22) or Minus <
> (23) button to set the desired brightness.
• Channels from 1 to 99 can be set.
•
The channel is adjusted, saved and shown on the display immediately after pushing the key.
•
By briefly pressing the Menu Select button (21) again, you can also save the set values and
go to the other operating modes.
8.2 Setting brightness (dimmer function) on the device
8.2.1 Dimming function Niova 60 Plus Bi Color on the device
•
Switch the device on with the ON/OFF switch (9) (if not already done).
•
Depending on the last selected functionality (the lamp has a memory function) the status
shows status LED blue (D), LED orange (C) or NONE of both status LEDs.
•
If the blue status LED (D) is on, the device is already in the brightness adjustment/dimming
mode.
•
If necessary, press the control knob <Push for Menu> (11) to switch between the brightness
and the color temperature mode.
•
Set the dimming mode, the status LED (D) lights up.
•
The selected light output is shown as a percentage value on the device display.
•
Turn the control knob <Push for Menu> (11) to set the desired brightness.
•
The brightness can be adjusted in steps of 1 % from 10 to 99 %.
•
The brightness value is adjusted, saved and shown on the display immediately after turning
the selection knob.
•
By briefly pressing the <<Push for Menu> (11) button again, you can also save the set values
and go to the other operating modes
8.2.2 Dimming function Niova 100 / 200 Plus Daylight on the device
• Switch the device on with the ON/OFF switch (9) (if not already done).
• Depending on the last selected functionality the brightness mode (display is NOT blinking) or
the channel selection mode (display is blinking) is displayed.
• If not the dimming mode is set, briefly press the menu selection button (21) on the control
panel once. Each time you press the Menu Select button (21), you can switch between the
two modes.
• Set the dimming mode, the display is not blinking
• The selected light output is shown as a percentage value on the device display.
• Press the Plus <+> (22) or Minus < > (23) button to set the desired brightness.
• The brightness can be adjusted in steps of 1 % from 10 to 99 %.
• The brightness value is adjusted, saved and shown on the display immediately after pushing
the key.
• By briefly pressing the Menu Select button (21) again, you can also save the set values and
go to the other operating modes.
8.3
Adjusting the color temperature on the device (for Niova 60 Plus Bi Color model only)
•
Switch the device on with the ON/OFF switch (9) (if not already done).
•
Depending on the last selected functionality (the lamp has a memory function) the status
shows status LED blue (D), LED orange (C) or NONE of both status LEDs (display is blinking).
•
If the orange status LED (C) is on, the device is already in the color temperature adjustment
menu.
•
If necessary, press the control knob <Push for Menu> (11) to switch between the brightness
and the color temperature mode.
•
Select the function for adjusting the color temperature (orange status LED <COLOR> (C)
lights up).
•
The current set color temperature is shown shortened by two numbers in the display of the
lamp. For example, 32 means 3,200 Kelvin, 44 means 4,400 Kelvin and 56 means 5,600 Kelvin.
