background image

 

1.

 

How to understand the instruction manual 

1.1

 

Markings on the device 

 

This marking mean, that your device meets the safety requirements of all 
relevant European Directives.   

 

This marking mean, that your device should be disposed in the local 
disposal points. Dieses Zeichen bedeutet, dass Sie das Gerät nur bei einer 
örtlichen   

1.2

 

Markings in this manual 

Marking 

Meaning 

 

Indicates the handling and consequences of safety 
notes.   

  WARNING 

Indicates a hazardous situation, which, if not 
avoided, could result in a 

serious 

injury or 

death

.   

 

CAUTION

 

Indicates a hazardous situation, which, if not 
avoided, may result in 

minor

 or 

moderate

 injury.   

ADVICE: 

Indicates potentially physical damages and other 
important information in connection with your 
device.   

 
 

 

2.

 

Important safety notes 

  WARNING 

Danger of blinding for eyes 
The optical radiation of the lamps could blind your eyes and lead to afterimages, if persons and 
animals look into the lamp directly. This could lead to injuries. Please avoid persons and animals 
looking into the device directly. 

  WARNING 

Danger of crashing, entrapment and fire through the falling down of the device 
The weight of the device is – depending on the model – up to 13kg. 

 

Make sure, that the device is always positioned tilt and skid resistant and stored securely. 

 

 

Keep out of reach of children and animal. They could overturn the device. 

 

 

Avoid placing cables where they can be tripped over. The device could be overturned. 

 

  WARNING 

Danger of electric shock, burn hazard 
Please note, that the device is still connected with the supply voltage even if it is switched off. Just 
after disconnecting the device from the power supply through pulling out the power cable, the 
device is actually de-energized. 

 

Switch off your device when it is not in use. 

 

Switch off your device before mounting and maintenance and disconnect from power supply.   

 

Protect your device against unintended switching-on.   

 

Unplug the power cord, if the flash is not in use for a long time.   

Summary of Contents for 17157













Reviews: