9
7.
Operation of the device
WARNING
Make sure, that the lamp tripod is positioned tilt and skid resistant.
7.1
Adjust tilt angle
Open tilt lever.
Adjust the required tilt angle.
Tighten tilt lever.
7.2
Switch the device on and off
Switch on device:
Set main On/Off tappet switch on I.
The device is ready for operation.
If the lamp is switched on:
The lamp lights up.
Switch off device:
Set main On/Off tappet switch on O.
If lamp was switched on:
The lamp will go out.
7.3
Switch lamps on and off
The lamps can be switched on and off through the tappet switch on the operation panel.
8.
Transportation and storage
Switch off device.
See
Switch the device on and off
.
Unplug the power cord.
Let the device cool down completely.
WARNING!
Danger of burning through hot parts. Let the device cool down completely.
Screw out the lamps and store them securely.
See
Screw lamps in and out
.
Demount Fluorescent Light from lamp tripod.
Clean the device if necessary.
See
Cleaning
.
Put the device and all demounted elements in one carton and carry and store them according to
the requirements in the technical specifications. See
Technical specifications
.
