7
•
Screw out lamps:
Screw out the lamps carefully and store them securely.
6.3
Connect to power supply
•
Switch off device. See
Switch the device on and off
.
•
Compare the local power supply with the connected load of the device.
See
Technical Specifications
. If the values differ, please contact
or tel. 49 84
32 / 9489-0.
•
Connect the power cord with the power socket.
7.
Operation of the device
7.1
Adjust rotating and tilt angle
•
You can adjust the required position by slight pulling, rotating and turning
7.2
Switch device/lamps on and off
•
Switch on device:
Turn the ON/OFF rotary switch clockwise until you can hear it.
•
The device is ready for operation.
•
The lamp lights up.
•
Switch off device:
Turn the ON/OFF rotary switch clockwise until you can hear it.
•
The lamp goes out.
8.
Transportation and storage
•
Switch off device.
See
Switch the device on and off
.
•
Let the device cool down completely.
WARNING!
Danger of burning through hot parts. Let the device cool down completely.
•
Screw out lamps.
See
Screw lamps in and out
.
•
Demount power cord.
•
Clean the device if necessary.
See
Cleaning
.
•
Put the device and all demounted elements in one carton and carry and store them according to
the requirements in the technical specifications. See
Technical specifications
.
9.
Solve problems
Problem
Possible reason
Remedy
Device is switched
on, but has no
Power cord is not plugged
or plugged in incorrect
Plug in power cord correctly
