6
5.
Quick-start guide
ADVICE:
The detailed instruction for the following operations can be found in the respective chapters in this
instruction manual.
Keep the sequences of the following operation steps when using the device for the first time to avoid
damages on the device.
WARNING
Please note the safety notes in the respective chapters throughout operation.
•
Mount device.
•
Screw lamps in and out.
•
Adjust rotating and tilt angle.
•
Connect to power supply.
•
Switch device/lamps on/off.
6.
Preparation for operation
6.1
Mount device (optional)
WARNING
Only mount the device on a surface, which is suitable for the weight and
dimensions of the device. See
Technical Specifications
.
Make sure, that the surface with the mounted device has a tilt resistant
stand.
•
Open fixing screw of the screw clamp.
•
Put the device on a surface, e.g. shooting table.
•
Tighten fixing screw of the screw clamp.
6.2
Screw lamps in and out
WARNING
Danger of cutting and splitting through breaking or bursting lamp
Don´t let the lamp fall down.
Don´t touch the lamps with bare hands. Just touch the lamp at the plastic socket or wear clean
cotton gloves or use a clean cloth.
ADVICE: Possible discolouration through burn marks on the lamps.
•
Switch off device.
See
Switch device/lamps on and off
.
•
Disconnect from power supply:
Demount power cord.
•
Let the device cool down.
CAUTION!
Danger of burning on lamps. Let the device cool down for approx. 25 minutes.
•
Screw in lamps:
Screw the lamps carefully into the sockets.
WARNING!
Danger of electric shock. Screw in the lamp in the socket as to avoid touching in
the sockets, when the device is switched on.
Fixing screw
