8
6.3 Screw in and out of lamps
WARNING
Danger of cutting and splitting through breaking or bursting lamp.
Don´t let the lamps fall down.
Switch off device.
See
Switch the device on and off
.
Disconnect from power supply:
Plug out power cord.
Let the device cool down.
CAUTION!
Danger of burning on lamps. Let the device cool down for approx. 20 minutes.
Screw in lamps:
Screw in the lamps carefully.
WARNING!
Danger of electric shock in lamp sockets.
Always screw in the lamp as to avoid touching in the
socket, when the device is switched on.
Screw out lamp:
Screw out the lamp carefully and store it securely.
Put the front diffusor over the lamp and fix it with the
Velcro fasteners.
6.4
Connect to power supply
Switch off device.
See
Switch the device on and off
.
Compare the local power supply with the connected load of the device. See
Technical
Specifications
. If the values differ, please contact
or tel. 49 84 32 / 9489-0.
Connect the power cord with the socket on the device and with the power socket.
7.
Operation of the device
7.1
Use of front and upper camera opening
You can open/close the upper and front camera opening with the Velcro fastener or the zipper
according to your requirements.
ADVICE: We recommend using a walimex tripod as to achieve optimal pictures.
7.2
Switch the device on and off
Switch on device: Set main On/Off switch on I.
The device is ready for operation.
If the lamp is switched on:
The lamp lights up.
ADVICE: 2 lamps will always light up when switching on the main switch.
Switch off device: Set main On/Off switch on O.
If the lamp is switched on:
The lamp will go out.
