7
5.
Quick-start guide
ADVICE:
The detailed instruction for the following operations can be found in the respective chapters in this
instruction manual.
Keep the sequences of the following operation steps when using the device for the first time to avoid
damages on the device.
WARNING
Please note the safety notes in the respective chapters throughout operation.
Unpack and unfold the device
Fold to a cube
Screw lamps in and out
Connect to power supply
Switch on device
Switch lamps on and off
6.
Preparation for operation
6.1
Unpack and unfold the device.
1.
Open the bag and unfold the sides.
2.
Take out the loose side (3) with the front camera
opening (operation front).
6.2
Fold to a cube
1.
The side with the rounded edges must show forward.
2.
Put the loose side (3) with the front camera opening
(operation front) on the side with the rounded edges.
3.
Put side (1) upwards to the rear side of the cube.
4.
The side parts (2) can be closed with the front side (3)
now.
5.
Finally, you can close the lid with the upper camera
opening (3) according to your requirements.
1
2
2
2
2
1
3
3
