10
What you should do?
Before
every
operation
With every
change
Check, if the lamps are screwed in firmly.
In case of damage:
WARNING!
Danger of electric shock and fire through short-
circuit. The device should be repaired by an electrician
immediately.
X
10.2
Cleaning
WARNING
Danger of cutting and splitting through breaking or bursting lamp
Don´t let the lamps fall down.
WARNING
Danger of electric shock
The contact with moisture or water should be avoided.
Unplug the power cord before cleaning the device.
ADVICE: Just use the following specified cleaning suppllies.
Ready-To-Go Light Cube
Cleaning
Housing
Use a dry microfiber cloth to remove light and stubborn dirt
Lamps
Wipe off with dust brush or dry, soft cloth
ADVICE:
Don´t clean the lamps with water. Even small residues on the
lamps could lead to bursting
10.3
Change lamps
WARNING
Please just use lamps, which are conform to the required specifications.
See
Technical specifications
.
Screw lamps in and out.
See
Screw the lamps in and out
10.4
Change micro-fuse
WARNING
Danger of electric shock and fire through short-circuit
A micro-fuse, which is not conform with the required specifications, doesn´t protect against the
overloading of the device.
Please just use a micro-fuse, which is conform with the required specifications. See
Technical
Specifications
.
Switch off device.
See
Switch the device on and off
.
