background image

42

43

8.8  Setting brightness (dimmer function) via the remote control

•  

Press the ON/OFF button on the remote control once briefly to activate the remote control.

•  Ensure that the device and the remote control have been correctly paired up and the same 

channels set. (See previous section 8.6).

•  

Check that the red status LED on the remote control‘s display is shining and that the dimming 

function is activated

•  

If the dimming function is not set, press the <Menu> key on the remote control until the red 

status LED on the remote control‘s display lights up. Each time you press the <Menu Select> 

button on the remote control, you can switch between the brightness, color temperature and 

channel settings menu.

•  Set the dimming mode, the red status LED lights up.
•  

The brightness value currently set on the remote control is displayed in % on the remote 

control display.

•  

Set the desired light output by pressing the plus <+> and minus <-> buttons on the remote 

control. The values on the lamp are automatically synchronized with the settings of the remote 

control if a new value is set for the first time.

•  The brightness of the lamp changes and the selected values for the brightness are shown on 

the displays of the lamp and the remote control at the same time.

•  

The brightness can be adjusted in steps of 1% from 10 to 99%.

•  The selected values are applied and saved by the device immediately.

8.9  Adjusting the color temperature on the remote control (for bi color models only)

•  

Press the ON/OFF button on the remote control once briefly to activate the remote control.

•  Ensure that the device and the remote control have been correctly paired up and the same 

channels set. (See previous section 8.6).

•  

Check that the orange status LED on the remote control‘s display is on and that the color 

temperature set mode is activated

•  

If the color temperature set mode is not activated, press the <Menu> key on the remote cont-

rol until the orange status LED on the remote control‘s display lights up. Each time you press 

the <Menu Select> button on the remote control, you can switch between the brightness, 

color temperature and channel settings menu.

•  The currently set color temperature is shown in shortened form on the display of the remote 

control. For example, 32 means 3,200 K, 44 means 4,400 K and 56 means 5,600 K.

•  

Set the desired color temperature by pressing the plus <+> and minus <-> buttons on the 

remote control. The values on the lamp are automatically synchronized with the settings of the 

remote control if a new value is set for the first time.

•  

The color temperature can be set in steps of 100 Kelvin from 3,200 - 5,600 Kelvin.

•  The selected values are applied and saved by the device immediately.

9.  Transporting, storing the device

 WARNING

Danger of fire caused by hot parts of the equipment. Allow the device to cool down completely.

• Switch off the device (See „Switching the device on, off).
• Allow the device to cool down completely.
• 

Unplug the power supply cable from the device.

• 

If necessary clean the device (See „Cleaning the device“).

•  

Lay the device and all disassembled elements into the original article packaging box and 
transport of store as specified in the technical specifications. See technical specifications.

10. Troubleshooting

Problem

Possible cause

Remedy

The device is 

switched on, but 

does not show any 

function.

Mains cable not plugged in

or not plugged in correctly

Plug the mains cable in

correctly

Device is switch off

Turn on the device

Not enough batteries 

installed

Install 2 batteries

Batteries are 

exhausted

Charge the batteries

The illuminants 

does not light

Device ist switched off

Switch on the device

The device is defective

Contact our service! Repairs may 

only be done by a qualified electri-

cian

Remote control does not 

work

No batteries inserted

Insert batteries

Device ist switched off via 

power switch

Switch on the device with the  

ON/OFF switch

Wrong channel selected

Make correct channel selection 

The device is defective

Contact our service! Repairs may 

only be done by a qualified electrician

Summary of Contents for Niova 800 Plus Daylight

























Reviews: