background image

40

41

8.5 Function buttons / display data / menu description of the remote control

8.6 Selecting the channel on the remote control / synchronizing the lamp and remote control

•  

Before first using the device, insert sufficiently charged compatible batteries (2x AAA 1.5V) 

into the remote control.

•  Switch the device on with the ON/OFF switch (16) (if not already done). The <ON/OFF> func

-

tion off the remote control will not work if the power switch on the lamp is switched off.

•  

Press the ON/OFF switch on the remote control once briefly to activate the display..

•  

Check the currently selected settings in the device and remote-control display. The channel 

selected on the remote control must be the same as the channel set on the device.

•  If the channels are incorrectly set, press twice on the <Menu> button of the remote control. 

Each time you press the <Menu> button on the remote control, you switch between setting 

the brightness, color temperature and channel. 

•  The currently set channel is displayed and the channel selection is activated if NO status LED 

on the remote-control display is shining.

•  

Set the desired channel by pressing the plus <+> or minus <-> buttons on the remote control.

•  

Press the <Menu> button again to confirm the channel selection and to return to the settings 

menu for brightness adjustment (basic settings).

•  

Check whether the set data on the remote control and the lamp match. If necessary, set the 

correct values on the lamp as described in section 8.4.

•  The lamp is now ready to be controlled via the remote control.
•  The display of the remote control has an automatic switch off function. To reactivate the dis

-

play, please press the <ON/OFF> button briefly.

8.7  Switching the device on and off / standby mode via the remote control

•  Switch the device on with the ON/OFF switch (if not already done). The <ON/OFF> function 

on the remote control will not work if the power switch on the lamp is switched off.

•  

Press the ON/OFF button on the remote control once briefly to activate the remote control.

•  Ensure that the device and the remote control have been correctly paired up and the same 

channels set. (See previous section 8.6).

•  

By pressing the <ON/OFF> switch on the remote control for a longer time (around 2-3 se-

conds), you can switch the lamp off (set the standby mode).

•  

By pressing the <ON/OFF> button on the remote control BRIEFLY again, you can switch on 

the lamp with the remote control.

•  The remote control has an automatic switch off function. To reactivate the display, please 

press the <ON/OFF> button briefly.

NOTE:

The individual status modes of the <function selection> menu are shown in short description on the 

backside of the remote control

Overview functions remote control display:

•  

Red status LED

 – Setting brightness by remote control

•  

Orange status LED – 

Setting color temperature by remote control  (only Bi Color version)

•  

No status LED – 

Setting channel by remote control

•  

Green status LED – 

Illuminates when the minus <-> and plus <+> buttons pushed

Minus <-> knob

<function selection> knob 

Status LED orange = color 

temperatures selection

Display

Plus <+> knob

Status LED red = dimming function

ON/OFF> knob

Display (2-digits), shows the values for 

brightness, color temperature, channel

Summary of Contents for Niova 800 Plus Daylight

























Reviews: