background image

28

29

 WARNING

Danger of electric shock, fire through short-circuit

A short-circuit could be caused through defect cables and through humidity or moisture. A 

short-circuit can warm up the conductors, so that there isolation will melt or even melt thoro-

ughly. This could lead to fire.

 

Please just use the original cables, which are included in delivery. They are aligned for 

your device and guarantee the necessary safety for you and your device.

 

Don´t operate the device with wet hands or feet. 

 

Operate the device only in dry rooms. 

 

Don´t operate the device outdoors. 

 

Please only follow this instruction manual for cleaning your device.

 

Make sure, that cables and conductors won´t be damaged. Damages could be caused 

through heat impact, chemical influence or through mechanical impacts as rubbing, ben

-

ding, tearing, rolling over or nibbling animals. 

 

Prevent your device for falling-off. In case of falling-off, please let an electrician check the 

device before switching on again. 

 

If your device should be damaged or defect or if you notice a burning smell: 

Disconnect the power supply by pulling out the power cord. Never operate your device 

with damaged housing, damaged reflector, defect modeling lamp, defect flash tube or 

damaged power cord. Don´t open the device. Never repair the device on your own. The 

device should only be repaired by electricians.

 

Please follow this instruction manual for maintaining your device. 

 

Please just use spare parts, which are conform to the required specifications.

 

Illuminants must only be replaced by a skilled electrician

 WARNING

Fire danger through overheating

The device can overheat, if you operate it with covered ventilation slots. The device itself or 

easily inflammable materials in close distance could catch fire.

 

Don´t cover the ventilation slots of the device during operation. 

 

Remove easily inflammable materials. 

 

Please just use spare parts, which are conform to the required specifications.

 WARNING

Danger of burning on hot parts 

 

The illuminant may reach temperatures of up to 40 °C.

 

Don´t touch the parts during operation and cooling down. 

 

Please cool down your device before starting any mounting or maintenance arrangements.

 WARNING

Danger of cutting and splintering caused by bursting illuminant

Illuminants can break or splinter when banging against the floodlight. Splinters can cause eye 

and skin injuries.

 

Handle illuminants with care, to avoid breakage.

 

Make sure you do not touch the illuminant by accident when mounting or replacing accesso-

ries.

 WARNING

Danger of suffocation caused by small parts

Keep the device out of the reach of children and pets.

 WARNING

Precautions when using with rechargeable battery

These can run out or explode, if inappropriately handled. Please observe the following safety 

notes when handling the rechargeable battery for use with this unit:

 

Use only rechargeable batteries mentioned in these operating instructions.

 

Do not lay the rechargeable battery into fire or expose these to direct heat.

 

To prevent the product from being damaged make sure you have removed the rechargeable 

battery if you will not use the product over a longer period of time or if the rechargeable battery 

has been discharged.

 

If battery fluid has come into contact with skin or clothes, flush it off immediately with fresh 

water.

 

Do not recharge the rechargeable battery unattended.

 

Once the reacharging process is finished, disconnect the charger from the power supply.

3.  Unpacking and checking the device

3.1 Carefully unpack the package content.
3.2   Check whether the scope of delivery is complete.

3.3  Please find full scope of delivery for your device on Page 47.

3.4 Check whether the scope of delivery is free of damage.

 

NOTICE

If the scope of delivery is incomplete or damaged, please contact [email protected] or call our 

service hotline at +49 8432 9489-0.

In the interest of product improvements, we reserve the right to make technical and visual ch-

anges. Illustrations may differ slightly. Not subject to identification or labelling as per Directive 

2010/30/EU. Not suitable for illumination purposes in households. Specially developed for photo 

and video shooting requirements.

Summary of Contents for Niova 600 Plus BI Color


























Reviews: