The Control Panel
17
STVC Quickstart
Solo Section
The Solo Section is a 16-voice synthesizer that comple-
ments the strings.
Split/Layer Selector
Sets the keyboard range for the solo section:
•
Low
(left position) played on keys lower than the split
key. Holding down a key while selecting ”Low” sets the
split key to highest note for the solo layer.
•
Layer
(middle position) plays on all keys. If the vo-
coder is active, solo is mixed to the vocoder carrier and
the inherent filter is bypassed.
•
High
(right position) played on keys higher or same as
the split key. Hold down a note while switching to set
the split key.
Tone
This is the sound setting for the Solo section. Moving this
knob blends smoothly through sounds named Bass,
E-Piano, Clavi, Synth, Pluto, Mono and Full. Note that
sounds only have a faint resemblance to their names,
which is common for the genre of String synthesizers. Bass
plays an octave lower, Mono and Full are monophonic
sounds.
