24
Gas Griddle
Pilot Burner
a. With the gas supply turned off at the main supply,
remove the griddle plate section by lifting it straight off
the Cooktop.
b. Remove the gas control heat shield from around the
griddle burner, this is just a push in fit.
c. Disconnect the thermocouple and the piezo igniter from
the mounting bracket. (For access purposes).
(See Fig
28).
d. Disconnect the pilot supply tube from the pilot burner
with a 13 mm (½") spanner.
(See Fig 28).
e. Remove existing pilot injector and replace with the
correct size for the gas being used. Refer to the ‘Gas
Specifications’ table at the end of this section, for correct
injector sizes.
f. Re-connect the pilot supply tube to the pilot burner with
a 13 mm (½") spanner.
(See Fig 28).
g.
Refit the piezo igniter and thermocouple to the mounting
bracket.
(See Fig 28).
h. Repeat Items a) to g) for all griddle pilot burners.
Main Burner
a. Remove the main burner from the burner box by
removing the securing screw at the end of the burner,
this will reveal the main injector.
(See Fig 29).
b. Remove and replace the main burner injectors with
correct size injectors. Refer to the ‘Gas Specifications’
table at the end of this section, for correct injector sizes.
c. Refit the burner to the griddle burner box.
d. Refit the gas control heat shield to the griddle burner
box.
e. Refit the griddle plate section to the top of the Cooktop.
f. Repeat Items a) to e) for all griddle main burners.
g. Turn ‘ON’ the gas supply at the mains, re-light the
griddle burners and check the flame size on the ‘LOW’
flame position.
Low Fire Adjustment
a. To adjust the griddle burner ‘LOW’ fire adjustment,
remove the gas control knob from the front of the control
panel.
b. Adjust the ’Low Fire’ adjustment screw on the griddle gas
control valve (Refer to Fig 30) only to obtain the desired
flame size.
NOTE: The “Low Fire Screw” should be sealed with coloured
paint on completion of the low fire adjustment.
Gas Conversion and Specifications
Fig 28
Piezo Igniter
Thermocouple
Pilot Burner
Gas Control
Heat Shield
Fig 27
Burner Securing
Screw
Fig 15
Fig 29
Main Injector
Pilot Burner
supply tube
Pilot Supply
Tube
Low Fire
Screw
Fig 30
Summary of Contents for RNL8510GC
