Gas Conversion and Specifications
22
Gas Type Identification Label
On completion of gas conversion, replace gas type identification label, located at:-
- Rear of the unit, above the gas connection.
- Beside the Rating Plate.
Commissioning
Before leaving the installation;
1.
Check all gas connections for leakages using soapy water or other gas detecting equipment.
2.
Carry out a ‘Commissioning’ check of appliance as shown in Installation Section of this manual.
3.
Ensure any adjustments done to components that have adjustments / settings paint sealed are to be
re-sealed.
D
O
NOT
USE
A
NAKED
FLAME
TO
CHECK
FOR
GAS
LEAKAGES
.
Warning
