20
- Australia
- New Zealand:
- United Kingdom & EU (CE):
Category:
II
2H3P
(20. 37),
II
2H3B/P
.(20, 28-30).
Flue Type: A
1.
NOTE: (*) Measure burner operating pressure at upper test point (Supply Pressure) on gas control
valve located behind control panel, this is to be carried out with burner operating at
‘
High
Flame
’
setting. Operating pressure is ex-factory set, through appliance regulator and not to
be adjusted, apart from when carrying out gas conversion, if required. Refer to
‘
Gas
Conversion and Specification
’
Section for further details.
Main Burner Injectors
Ø 3.10mm
Ø 1.90mm
Pilot Burner Injectors
0.62
0.35
Low Fire Screw
Ø 1.55mm
Ø 1.55mm
High Fire Screw
Fully Out (c.c.w.)
Fully Out (c.c.w.)
Supply Pressure
1.13 - 3.40 kPa
2.75 - 4.50 kPa
Burner Operating Pressure (*)
0.92 kPa
2.6 kPa
Gas Regulator Cap Screw
Main Burner Injectors
Ø 3.10mm
Ø 1.80mm
Pilot Burner Injectors
0.62
0.35
Low Fire Screw
Ø 1.55mm
Ø 1.55mm
High Fire Screw
Fully Out (c.c.w.)
Fully Out (c.c.w.)
Supply Pressure
1.13 - 3.40 kPa
2.75 - 4.50 kPa
Burner Operating Pressure (*)
0.92 kPa
2.6 kPa
Gas Regulator Cap Screw
Main Burner Injectors
Ø 3.10mm
Ø 1.90mm
Pilot Burner Injectors
0.62
0.35
Low Fire Screw
Ø 1.55mm
Ø 1.55mm
High Fire Screw
Fully Out (c.c.w.)
Fully Out (c.c.w.)
Supply Pressure
20 mbar
37 mbar
Burner Operating Pressure
9.5 mbar
27.7 mbar
Gas Regulator Cap Screw
