14
1.
Clean interior of pan regularly after each use. Do not use wire brushes on pan. Clean using a mild
detergent and a hot water solution using soft cloth or a soft bristled brush. Dry appliance
thoroughly using a dry clean cloth.
1.
The water should be drained and re-filled regularly. Open the drain valve slowly to minimise
splashing. Waste water will drain into the tundish fitted below the appliance drain outlet.
2.
When the tank is empty, open the drain valve fully and check for any particles or residue lodged in
the valve. Clean out with a stiff nylon brush. Do not use a wire brush or metal rods as these
damage the seating in the valve and will eventually lead to valve leakage.
3.
If the obstruction in the valve cannot be removed with a brush, use a wooden probe to dislodge any
obstruction.
4.
Clean the control panel using a damp cloth lightly moistened with a solution of mild detergent and
hot water. Dry the control panel thoroughly using a dry clean cloth.
5.
At the end of each day or at end of each shift,
Clean the interior and exterior of the pasta cooker using a mild detergent and a hot water
solution using soft cloth or a soft bristled brush. Do not use wire brushes on the pan. Dry the
appliance thoroughly using a dry clean cloth.
Clean the pasta / noodle baskets using a mild detergent and hot water solution using a soft cloth
or a soft bristled brush. Rinse in fresh water and thoroughly dry using a dry clean cloth.
6.
Once the daily cleaning operation is completed, ensure that the drain valve has been closed.
Locking Slide
Fig 6
Fig 5
Locking Slide
HOT WATER WILL SCALD - DO NOT RUSH THIS JOB.
DO NOT ATTEMPT TO MOVE PASTA COOKER WHILST COOKER IS FULL OF WATER.
BEFORE ATTEMPTING TO MOVE PASTA COOKER, ENSURE THAT ALL WATER HAS BEEN
DRAINED FROM TANK. REFER TO INFORMATION ON PREVIOUS PAGE ON HOW TO DRAIN
WATER FROM PASTA COOKER.
