background image

14 

 

Griddle Cooking Area 

 

a.  Clean the griddle cooking area with a soft cloth and a mild detergent and hot water solution. 

b.  Baked on deposits or discolouration may require a good quality stainless steel cleaner or stainless 

steel wool.  Always apply cleaner when the appliance is cold and rub in the direction of the grain. 

c. 

Remove the grease drawer and clean with a mild anti bacterial detergent and hot water solution 

using a soft bristled brush.  

Dry the grease drawer thoroughly with a dry cloth. 

 

Stainless Steel Surfaces 

 

a.  Clean the exterior surfaces of the griddle with hot water, a mild detergent solution and a soft 

scrubbing brush.  Note that the control knobs are a push fit onto the spindles and can be  

removed to clean the front of the control panel. 

b.  Baked on deposits or discolouration may require a good quality stainless steel cleaner or stainless 

steel wool.  Always apply cleaner when the appliance is cold and rub in the direction of the grain. 

c.  To remove any discolouration, use an approved stainless steel cleaner or stainless steel wool.  

Always rub in the direction of the grain. 

d.  Remove the grease tray and clean with a mild anti bacterial detergent and hot water solution  

using a soft bristled brush. 

e.  Dry the grease tray thoroughly with a dry cloth. 

f.  Dry all components thoroughly with a dry cloth and polish with a soft dry cloth. 

 

 

 

NOTE:  All maintenance operations should only be carried out by a qualified service person. 

 

To achieve the best results, cleaning must be regular and thorough and all controls and mechanical parts 

should be checked and adjusted periodically by a competent serviceman.  If any small faults occur, have 

them attended to promptly.  Don't wait until they cause a complete breakdown.  It is recommended that 

the appliance is serviced every 6 months. 

For  the  Refrigeration  Cabinet  Cleaning  and  Maintenance  refer  to  the  Refrigeration  Cabinet 

Installation and Operation Manual supplied with the appliance. 

Summary of Contents for GPB8600E
























Reviews: