26
Operation
ENG
6. Operation
Fig. 8: Button.
6.1 Switch-on and switch-off
X
Briefly press the button, see Fig. 8.
6.2 Dimming
This function is used to change the bright-
ness of the luminaire.
X
Press the button and keep it depressed,
see Fig. 8.
After about one second, the luminaire
will change its brightness.
X
To change the dimming direction, press
the switch again and keep it depressed.
This will save the set brightness. The
next time the luminaire is switched on,
the brightness saved last will be set.
6.3 Adjusting the switch-on
behavior
With this function you can set the lumi-
naire in such a way that it restores the
last switching state after an interruption of
power supply or that the luminaire remains
switched-off in such case.
NOTE:
The function is set by default in such
a way that the luminaire remains switched-
off after an interruption of power supply.
Activating external switching "last
switching state"
X
Disconnect the luminaire from the
mains.
X
Press the button and keep it depressed
and connect the luminaire again.
The luminaire restores the last switch-
ing state if it is supplied with power
again after an interruption.
Deactivating external switching
X
Disconnect the luminaire from the
mains.
X
Press the button and keep it depressed
and connect the luminaire again.
The luminaire remains switched-off if
it is supplied with power after an inter-
ruption.
