26
Connection
ENG
4. Connection
NOTICE
Material damage caused by ingress
of humidity.
Damage or destruction of the device.
X
Use a plug-in connection that guar-
antees at least the same degree of
protection as the device.
NOTICE
Material damage caused by improper
installation.
Damage or destruction of the device.
X
Do not
twist the plug and the
socket against each other.
X
Tighten the union nut of the plug-in
connection to the defined torque.
The device has two connections:
Input: Plug M12-A-5 type A, see Tab. 3
Output: Socket M12-A-5 type E, see
4.1 Connecting the device to the
supply voltage
NOTICE
Material damage caused by wrong
mains voltage.
Damage or destruction of the device.
X
Connection by a skilled electrician
only.
X
Operate the luminaire at safety
extra low voltage (SELV) only.
X
Observe the pin assignment and
the socket assignment.
X
Use a connecting cable with
strands which have a conductor
cross-section of 1.0 mm².
X
Make sure that the maximum per-
missible short-circuit current of the
voltage source is not exceeded:
I
K
< 4 A
X
USA and Canada:
This device
must be connected to a power
supply unit of class 2.
To connect the device, we recommend
using connecting cables found in the
Waldmann range of accessories.
