33
Mounting
ENG
X
Lift the luminaire head to align it verti-
cally and tighten the adjusting screw
X
against the support tube counterclock-
wise by hand, siehe Fig. 9.
Securing the luminaire head
a
Y Z
Fig. 10: Securing the luminaire head.
X
Screw the screw
Y
along with the too-
thed washer
Z
into the bore
a
on the
support tube and tighten the screw,
Mounting the second luminaire head
X
Mount and secure the second lumi-
naire head.
3.6 Connecting the light head
1
b
Fig. 11: Connecting the light head, Part 1
1
2
3
4
No.
Designation
1
Tastm. (operating element)
2
HFMD sensor, PIR sensor
3
TIME Modul (VTL)
4
TA L K M o d u l , K N X / L O N
Tab. 3: Assignment of the sockets.
X
Connect the plug
b
to the socket
1
"Tastm." at the light head, siehe Fig. 11
d
c
Fig. 12: Connecting the light head, Part 2
X
Connect the socket
c
to the plug
d
at
