32
Mounting
ENG
P
Fig. 5: Aligning the luminaire head perpen-
dicularly to the support tube.
X
Align the luminaire head perpendicularly
to the support tube and tighten the two
grub screws
P
against the support tube
counterclockwise by hand, siehe Fig. 5
Q
Fig. 6: Adjusting the inclination.
X
Lift the luminaire head to align it verti-
cally and tighten the adjusting screw
Q
against the support tube counterclock-
wise by hand, siehe Fig. 6.
X
Securing the luminaire head
T
R S
Fig. 7: Securing the luminaire head
.
X
Screw the screw
R
along with the too-
thed washer
S
into the bore
T
on the
support tube and tighten the screw,
Mounting the second luminaire head
X
Mount and secure the second lumi-
naire head
3.5 Mounting the luminaire head |
TWIN-T
This chapter describes how to mount the
luminaire heads for the
TWIN-T
geometry.
Mounting and aligning the luminaire
head
NOTICE
Material damage due to damaging the
electrical cables on the luminaire head.
Damage to the luminaire.
X
Do not
jam the cables.
U
V
W
Fig. 8: Mounting the luminaire head on the
support tube.
X
Guide the cables
U
from below through
the support arm
W
on the luminaire
head and insert the support arm com-
pletely into the support tube
V
, siehe
X
Fig. 9: Adjusting the inclination.
