Waldmann LAVIGO DPS Series, Instructions For Use Manual

Page: 33 / 88

33
Mounting
ENG
X Guide the cables U from below through
the support arm W on the luminaire
head and insert the support arm com-
pletely into the support tube V , see
Fig. 10.
X
Fig. 11: Adjusting the inclination.
X
Lift the luminaire head to align it verti-
cally and tighten the adjusting screw
X
against the support tube counterclock-
wise by hand, see Fig. 11.
Securing the luminaire head
a
Y Z
Fig. 12: Securing the luminaire head.
X
Screw the screw
Y
along with the
toothed washer Z into the bore a on
the support tube and tighten the screw,
see Fig. 12.
Mounting the second luminaire head
X
Mount and secure the second lumi-
naire head.
3.6 Connecting the light head
1
b
Fig. 13: Connecting the light head, Part 1.
1
2
3
4
No. Designation
1 Tastm. (operating element)
2
HFMD sensor, PIR sensor
3 TIME module (VTL)
4 TALK module, KNX/LON
Tab. 3: Assignment of the sockets.
X Connect the plug b to the socket 1
"Tastm." at the light head, see Fig. 13
and see Tab. 3.
d
c
Fig. 14: Connecting the light head, Part 2.
X Connect the socket c to the plug d at
the light head, see Fig. 14.