Waldmann LAVIGO DPS Series, Instructions For Use Manual

Page: 32 / 88

32
Mounting
ENG
P
Fig. 7: Aligning the luminaire head perpen-
dicularly to the support tube.
X
Align the luminaire head perpendicularly
to the support tube and tighten the two
grub screws P against the support tube
counterclockwise by hand, see Fig. 7
Q
Fig. 8: Adjusting the inclination.
X Lift the luminaire head to align it verti-
cally and tighten the adjusting screw Q
against the support tube counterclock-
wise by hand, see Fig. 8.
Securing the luminaire head
T
R S
Fig. 9: Securing the luminaire head .
X Screw the screw R along with the
toothed washer S into the bore T on
the support tube and tighten the screw,
see Fig. 9.
Mounting the second luminaire head
X Mount and secure the second lumi-
naire head
3.5 Mounting the luminaire head |
TWIN-T
This chapter describes how to mount the
luminaire heads for the
TWIN-T
geometry.
Mounting and aligning the luminaire
head
NOTICE
Material damage due to damaging the
electrical cables on the luminaire head.
Damage to the luminaire.
X Do not jam the cables.
U
V
W
Fig. 10: Mounting the luminaire head on the
support tube.