500.0022-A
3
Subject to technical changes
Starting to use your safe
As soon as the safe has been delivered and correctly anchored, you can start operating
the lock and using the safe.
To do so, please keep to the following procedure:
1.
Check that the rotary opening handle is
in the 'closed' position. Do this by
applying gentle pressure to move the
rotary opening handle counterclockwise
into the end position.
2.
Carefully unscrew the flathead screw
(positioned centrally under the input unit)
out of the housing (2 mm Allen key).
3.
Carefully pull the battery case
downwards out of the input unit housing
(six acoustic signals) and insert three 1.5
V AA alkaline batteries (LR6), or 1.5 V AA
lithium batteries (FR6) into the battery
case.
4.
Push the battery case carefully back up
into the housing and screw it in tightly
with the flathead screw (2 mm Allen key).
The display shows: BATCASE OPEN. To
delete this message again, enter the
opening code and confirm it with the
Enter key.
5.
Enter the factory code (0-0-1-2-3-4-5-6)
and confirm with the Enter key, then turn
the rotary opening handle clockwise into
the end position.
6.
Open the door. A short acoustic signal
(six beeps) every 30 seconds via the
Pay attention to the polarity of the
batteries!
