![background image](http://html1.mh-extra.com/html/waldbeck/10031507/10031507_manual_3181506010.webp)
Assembling the aluminium tubes:
Bottom tube (no rib)
Middle tube (with 1 rib)
Tube with plastic hook (w/ 2 ribs)
Mount the tubes onto the pump pressure connection (2). lf necessary, use a suitable tool to pull the aluminium tube connecting
elements in order to prevent water from leaking.
Securing the mains cable:
Secure the mains connection cable (12) to the cable clamp (19) on the plastic hook (22) and on the
middle aluminium tube (14).
Mounting the height adjustment for the float switch:
Loosen the screw on the float switch height adjustment (4) and push this over the float switch guide (5) . Then guide the float
switch cable (3) upwards.
lf you want to make use of the maximum pumping capacity of the pump rather than the maximum discharge height, we recom-
mend that you fit a 3/4“ connecting tube, mounting it directly on the pump, without alumini um tube or shut-off top. The larger
cross-section of the hose will enable a greater volume of water to be pumped. At the same time, the potential discharge height
will be correspondingly lower.
10
Summary of Contents for 10031507
Page 1: ...10031507 Regenfass Pumpe...
Page 13: ...Anhang Liste der Teile Appendix Parts List 13...
Page 16: ...16...