FRONT GRILLE
2019/05
GDJ150W/TRJ150W
PARTS
QUANTITIES
FRONT GRILLE
1
EACH 1
1 SET
FRONT GRILLE
CHROME ACCENTS A, B, C, D, E
BLOCK SPACERS
(2017y-)
LAND CRUISER
PRADO
INSTALLATION MANUAL
Completely degrease and paint primer on all
the installation positions to enhance the viscidity
of double sided tape.
Use dryer to warm double sided tape to enhance
the viscidity in low temperature.
Keep the car in a dry condition more than
24 hours after gluing.
Do not wash the car during this time.
THANK YOU FOR PURCHASING. THIS IS THE INSTALLATION MANUAL OF WALD FRONT GRILLE FOR TOYOTA LAND CRUISER PRADO.
PLEASE READ THIS MANUAL CAREFULLY BEFORE THE INSTALLATION.
※ NO RETURNS CAN BE ACCEPTED BECAUSE OF IMPROPER INSTALLATION OR PAINTING.
※ CHECK THE FITMENT, AND ADJUST ALL THE DETAILS BEFORE PAINTING.
Please purchase double sided tape,
primer and caulking glue at
auto accessory shop or hardware store.
Use caulking glue
to fill the gap
between the product
and the body.
※ PLEASE BE AWARE OF:
■ You may lose the warranty and all the services from the car maker, because of replacing OEM parts.
■ Reduced road clearance may cause inconvenience in using parking curbs and garage jack.
■ FRP, ABS and PPE products are slightly weaker than OEM parts in crashes.
■ The product may not match the body and OEM color perfectly.
■ We assume no responsibility for any damage resulting from improper installation, painting,
modification and any cut wound in unsealing.
■ Contact the car dealer when you have any question in removing OEM parts.
■ During all the installation process, use parking brake and stop the engine completely.
■ Use rasps or sandpapers to fit the products to the body if there is an individual difference.
■ The product is made of FRP. Handle with care. Do not give the excessive force.
Gradually fix the bolts and nuts by checking the fitment and balance of the installation.
■ Check the fitment, and adjust all the details of the fitment steady and proper.
Please check the fitment and all the details regularly, fix the bolts and nuts as necessary.
■ The instruction of painting is just our recommendation, please paint it as you like.
ATTENTION
【
BEFORE PAINTING
】
１） Check if all the parts are in a box or not.
２） Remove OEM Radiator Grille, Chrome Parts and Rubber Strip according to the TOYOTA service manual.
３） Remove OEM Emblem and Radar Unit from OEM Radiator Grille according to the TOYOTA service manual.
４） Temporarily install WALD Front Grille except the Attached Chrome Accents to the body.
※ Adjust the details of WALD Front Grille to fit the body by rasps or sandpapers.
５） Paint WALD Front Grille according to the picture.
【AFTER PAINTING】
６） According to HOW TO REPLACE OEM RADAR UNIT,
fix the attached Block Spacer on WALD Front Grille.
７） Temporarily install WALD Front Grille except the Attached Chrome Accents to the body.
８） Adjust the Angle, and Check the Functional Test at the local Toyota Dealer.
９） Fix the Attached Chrome Accents (A, B, C, D and E) on WALD Front Grille.
※ Completely degrease the installation position,
then fix them with the caulking glue and attached double-sided tapes.
※ Fold the both ends of release paper to adjust the location.
１０） Check all the details of the fitment.
１１） Fix all the OEM Parts taken at STEP 2 to the body.
ADD: 10-13 KYOGUCHI-CHO, TAKATSUKI, OSAKA, JAPAN
WALD. INTERNATIONAL
ZIP: 569-0072 TEL: (81)-72-673-3000 FAX: (81)-72-673-3003
※ MORE THAN 2 TECHNICIANS ARE NECESSARY IN THIS WORK.
DURING ALL THE INSTALLATION PROCESS, PLEASE BE CAREFUL NOT TO DAMAGE THE BODY.
※ MAKE SURE THE ATTACHED LED LAMPS IS FINE TO WORK BEFORE THE INSTALLATION
※ ADJUST ALL THE DETAILS OF OUR PRODUCTS TO FIT ON A CAR PERFECTLY.
ATTENTION
Type of Adhesive : Use the Silicone Glue
REPLACE OEM RADAR UNIT
BACK SIDE OF
WALD FRONT GRILLE
REPLACE OEM BRACKET
OEM BOLTS
ATTACHED
CHROME ACCENTS
ATTACHED CHROME ACCENTS
※Paint in Black for the Basement
of WALD Front Grille
A
B
C
D
E
DOUBLE-SIDED
TAPE
DOUBLE-SIDED
TAPE
REPLACE OEM RUBBER STRIP
REPLACE OEM NUTS
REPLACE OEM NUTS
OEM BOLTS
ATTACHED
BLOCK SPACER
REPLACE OEM EMBLEM
OEM BOLTS
■HOW TO REPLACE OEM RADAR UNIT
RADAR UNIT
DOUBLE-SIDED TAPE
