S
TARTING
UP
AND
OPERATING
C
HAPTER
7
THP 94/42 R 4 XXT
THP 125/42 R 4 XXT
THP 140 H/42 R 4 XXT
GB-07.2005
7-20
DANGER
7.5.5
Agitator
DANGER:
墌
During cleaning work the control lever (Item 5, Fig. 7.24) must always be in
the 0 position and must on no account be moved during the cleaning work!
墌
When working in the hopper, keep the vehicle engine switched off at all
times!
The control lever “Agitator” (Item 5, Fig. 7.24) switches the
agitator on (even when the Emergency Stop button has
been pressed).
The agitator should always be set to move the concrete
inwards to the centre – push the control lever to the right.
Setting the agitator to move the concrete outwards (control
lever to the left) should be done only for brief periods to
relieve a blockage or the remix the concrete.
Opening the safety grill automatically stops the agitator.
The manometer Item 1, Fig. 7.24) shows the actual pressure
at the agitator / water pump (optionally: high pressure water
pump and compressor). The maximum pressure that can
be set is 210 bar.
1
3
2
4
5
Fig. 7.24 Control panel Agitator / Water pump
