S
TARTING
UP
AND
OPERATING
C
HAPTER
7
THP 94/42 R 4 XXT
THP 125/42 R 4 XXT
THP 140 H/42 R 4 XXT
GB-07.2005
7-15
7.4.3
Controlling the distributor
boom using the cable
remote control pendant
•
Remove the right hand protective cap.
•
Unplug the “Radio” plug from the left hand
socket and plug it into the free right hand
socket
���
. Lock the plug in place.
•
Plug the extension cable for the cable
remote control into the left hand socket
���
.
Lock the plug in place. Radio remote
control is now deactivated.
•
Set the operating mode selection switch
(Item 14, Fig. 7.6) to “Remote control”.
•
Release the Emergency Stop by pressing
the Horn/Reset (Item 14, Fig. 7.18). The
horn will sound.
•
Switch the selector switch “Outrigger/
Boom” (Item 8, Fig. 7.18) to “Boom” and
uncap the Emergency Stop button.
•
The 50%/100% switch (Item 10, Fig. 7.18) controls the boom speed, 50% when pumping, 100% when deploying
/ stowing.
•
Press the master switch “Deploy boom element A / Slew boom” (Item 3, Fig. 7.18) and deploy boom element
A until the catch hook releases and the boom element B can be deployed (see Fig. 7.12).
•
Press the master switch “Deploy boom element A / Slew boom” (Item 3, Fig. 7.18) to move the distributor
boom into the position where the discharge hose retainer can be opened.
•
Press the master switch “Deploy boom element B” (Item 2, Fig. 7.18) and deploy boom element B until it is
approx. 120º to boom element A (see Fig. 7.14).
•
Use the joystick “Deploy boom element C and D” (Item 1, Fig. 7.18) to deploy boom element C to 90º to boom
element B (see Fig. 7.15).
•
Use the joystick “Deploy boom element C and D” (Item 1, Fig. 7.18) to deploy boom element D to 90º to boom
element C (see Fig. 7.16).
•
Position boom element D horizontally approx. 1 m above the ground.
•
Open the catch and release the discharge hose (see Fig. 7.17).
•
Use the joystick s(
1
to
3
) on the radio remote control to move the distributor boom to the desired working
position.
1
2
Fig. 7.19 Plug the extension cable for the cable remote control
