NOTE: This operations section was designed to give instructions on the basic operations of this planer.
However, it is in no way comprehensive of every planer operation. It is strongly recommended that you
read books, trade magazines, or get formal training to maximize the potential of your planer while
minimizing the risks.
NOTE: This planer is designed to process wood ONLY. The use of any other material will void your
warranty.
SECURING PLANER TO A TABLE OR WORKBENCH
During operation, the planer MUST be secured to a supporting surface such as a solid and
sturdyworkbench or table. Four holes are provided (2 are shown below) to securely mount the planer. 2
holes are located in the front and 2 at the rear of the planer The surface you are mounting the planer to
should be flat. The mounting hole diameter is 3/8” and the length of the mounting bolts (not supplied)
will be determined by the thickness of your workbench/table. For reference, the thickness of the base
at the mounting holes is 1 / 2”. Make sure to use washers, split lock washers, and nuts of the
appropriate size, to secure the planer to your work top.
18
