12
UNPACKING & INVENTORY
Check shipping carton and machine for damage before unpacking. Carefully remove packaging
materials, parts and machine from shipping carton. Always check for and remove protective
shipping materials around motors and moving parts. Lay out all parts on a clean work surface.
Be EXTREMELY CAREFUL working around the cutter tips as they are VERY SHARP!!!
Remove any protective materials and coatings from all of the parts and the jointer
except
for the
cutterhead. Specific cutterhead cleaning instructions follow. The protective coatings can be
removed by wiping the surfaces with a soft cloth.
NOTE: See later instructions for cleaning the cutterhead and insert tips which may be required
before operation.
NOTE:
Some parts pictured may already be installed on your machine
at the factory.
Go through the entire manual before contacting WAHUDA.
Compare the items to inventory figures and verify that all items are accounted for. If any parts are
missing, do not attempt to power on the machine. For missing parts, or shipping damage, contact
WAHUDA at
877-568-8879
.
A) Planer B) Table C) 4in Dust Port D) 4 to 2 ½ in Adaptor
E) 4ea Star Knob F) T Torx Handle G) 4mm & 2mm Allen wrench
H) 2ea long Magnets I) 2ea Short Magnets J) Crank Handle with socket head screw
K) Table Extension
