InformaCast Zone Controller Installation Guide
Page 5
11.11.2020
Audio Outputs
LINE OUT (unbalanced) –
Connect to amplifier via RCA mono
connector.
Configure audio settings in configuration webpages as
described in User’s Guide.
RELAY
(Single Channel Zone Controller only)
– The relay connector is a
3-pin male connector (included), wired to a Form C relay (SPDT) with
contacts rated for 30VDC or 270VAC at 3A.
Pin 1 is a Normally Closed (NC) dry contact closure.
Pin 2 is Common.
Pin 3 is a Normally Open (NO) dry contact closure.
STAT –
LED will illuminate when audio is being passed. The steadier the
STAT LED, the stronger the audio signal present.
