Wahsega Labs WL-SPKR-SMT-INF, User Manual

Page: 27 / 32

Surface Mount Speaker with InformaCast Page 26 v 1.8.1-20190215
STUN

Server/Port – Enter your STUN server here if applicable. STUN
servers may be required to operate with a public SIP server from
behind a NAT or router.
RTP

Port Range – Select the UDP port range to use for sending RTP
audio network traffic during a call.
SNMP

SNMP Enabled – SNMP is required for the InformaCast server to
control relays in the speaker. The speaker’s relays cannot be used
while SNMP is disabled , so be sure to check this box if you may be
using relays with InformaCast.

Port – The port number used for SNMP.

Read-only community string – The community string that will
allow read-only access to SNMP variables on this device. SNMP
community strings are sent in plain-text, so
do not re-use a
password that’s used for any secure logins or devices!

Read-write community string – The community string that will
allow read-write devices to access the SNMP variables on this
device. SNMP community strings are sent in plain-text, so
do not
re-use a password that’s used for any secure logins or devices!

Trap community string – The community string used when this
device sends SNMP traps.

Trap destinations

Add destination – Add destination for SNMP trap as
domain name or IP address plus port.