20
246.805.201
Date: 2017-09-26
Use the arrows
↑
and
↓
to adjust the DMX ADDR.
Save changed value
The display shows:
Push ENT to change the top line to:
Where X is an increasing number from 1 to 20.
Then press and hold ENT
The top line of the display counts up to 20 then shows OK.
The Value is now saved in the memory.
DMX ADDRESS setting
The DMX address, also known as the start channel, is the first channel used to receive
instructions from the controller. For independent control, each winch must be assigned
its own control channels.
The DMX address is configured using the three DMX ADDRESS selectors on the winch.
The selected DMX address states from which channels, on the lighting desk, the
winch is controlled. The DMX address can be selected from 1 – 506. The Winch 50 uses
6× DMX channels.
Summary of Contents for Winch 50 Double
Page 12: ...12 246 805 201 Date 2017 09 26...
