Wahlberg Winch 50 Double, User Manual

Page: 23 / 29

23
246.805.201
Date: 2017-09-26
Adjustable parameters
Menu Description Range Default
MAN SPEED Speed for manual driving 200 – 2500 800
MAN UP/DWN Run the motor manual from the menu MOTOR UP / MOTOR DOWN
DMX ADDR DMX start address 1-506 1
TAC RANGE Tacho range 1-50,000 N/A
SPEED MAX Maximum speed 500-3,500 3,500
SP MIN UP Minimum speed UP 50-1,000 200
SP MIN DWN Minimum speed DWN 50-1,000 200
E STOP Enable/disable emergency stop ON/OFF OFF
MAN SPEED and MAN UP/DWN are used for manual control of the motor.
Detailed explanation of parameters
MAN SPEED Speed for manual driving Range 200-2,500
MAN SPEED sets the speed for manual driving the motor
MAN UP/DWN Manually driving the motor
MAN UP/DWN is used for manual control of the motor.
Pressing the UP button, makes the wire run up. Pressing the DOWN button, makes the
wire run down, unless the limit switch is activated.
The winch will stop if the Emergency Switch is activated.
DMX ADDR DMX start address Range 1-506
DMX start address defines which DMX address the Winch 50 reacts on.
The Winch 50 uses minimum 6 DMX channels.
TAC RANGE Tacho range Range 1-50,000
The tacho range is setting the maximum range of the Winch
SPEED MAX Maximum speed Range 500-3,500
SPEED MAX sets the maximum speed.
If set to 1000, the motor run at 1000 RPM when DMX speed is set to full. SPEED MAX can
be used to lower the maximum speed, if desired.
SP MIN UP Minimum speed up Range 50-1,000
The motor minimum speed, for the up direction.
The motor is allowed to run at different minimum speed for each direction; this is to
differentiate between different mechanical loads for up and down. See SP MIN DWN.
Set this value to a speed where the motor will still run up at full load.
SP MIN DWN Minimum speed down Range 50-1,000
The motor minimum speed, for the down direction.
The motor is allowed to run at different minimum speed for each direction, this is to
differentiate between different mechanical loads for up and down, see SP MIN UP.
Set this value to a speed where the motor will still run down at full load.
E STOP Enable/disable emergency stop Range ON / OFF
This enables/disables the emergency stop from the software. However, to get the full
functionality of the emergency stop a wire has to be plugged in inside the winch. See
section on how to change the wire setting for more details.