JENS JUULS VEJ 1, 8260, VIBY, DENMARK
WWW.WAHLBERG.DK
TELEPHONE: +45 86 18 14 20
380.805.002
2
DATE: 2021-03-25
Introduction
Thank you for selecting the Wahlberg Motion Design Manipulator. A DMX controlled linear rail for
moving objects: Lamps, loud speaker, smoke machines or any other prop, in any direction.
Up and down, left and right, back and forth. The manipulator will make your stage or
installation more dynamic and create unique and noticeable effects for your audience.
Your moving object can also be powered and DMX controlled making the Manipulator a natural
extension of your existent inventory.
It is simple to install and use, and for most purposes, only use four DMX channels to control the
manipulator. Channel 1 and 2 set the 16-bit position high and low, respectively, with 0% position
being near the motor box. Channel 3 sets the maximum speed and channel 4 is a security
channel which must be between 50-55% for the manipulator to run. The available range of
motion can be easily adjusted to fit all venues.
Package content
1×
Manipulator
4x
Mounting brackets with M12 hex bolts, washers, and nuts
1x
Motor house mounting bracket with M6 hex socket bolts and washers
3x
Slim couplers
2×
PowerCON NAC3FX-W female plug for power input
1×
PowerCON NAC3MX-W male plug for wagon power output
1×
User manual
1×
Cheat sheet
Safety Information
This product is for professional use only. Please, follow the guidelines of this manual and keep
out of range of any non-professional. For further questions regarding installation or usage feel
free to contact
.
