INSTALLATION GUIDE
1. If connected, disconnect the winch power leads from
the battery.
2. Utilising the provided mounting hardware, find a suitable
location within 300mm from the vehicles battery to mount
the winch isolation switch.
3. Route the winch power cable to the isolation switch. The
existing winch power cable lug needs to be replaced with
the M10 lug supplied. This provides the opportunity to cut
your existing power cable to specific length of your
vehicle’s installation.
4. On confirmation of the suitable cable length, cut the
power cable and crimp on the new M10 lug provided.
5. Attach the main power cable from the winch to the
isolation switch.
6. Attach the short 300mm cable from the isolation switch
to the vehicle battery.
7. Using the cable ties provided, ensure all cables are
secure and have no potential of rubbing on other vehicle
components.
WINCH ISOLATION
SWITCH KIT
BASIC INSTALLATION GUIDE
