289.805.003
19
Date: 2018-11-28
Service and maintenance
WARNING
! Read “Safety Information” on page
2 before servicing the Mini Roll Down.
WARNING! Disconnect the Mini Roll Down from AC mains power and allow cooling down for at
least 10 minutes before handling.
WARNING! Refer any service operation not described in this user manual to a qualified service
technician.
WARNING! Incorrect insertion of the powerCON TRUE1 may cause electrical contact
misalignment resulting in equipment malfunction and/or personal injury.
ATTENTION! Interval of inspections should be determined according to the frequency of use and
the working scenario of the Mini Roll Down.
ATTENTION! Signs of malfunction or poor operation should always lead to an inspection of the
Mini Roll Down, and the Mini Roll Down should be taken out of operation until the error is
eliminated.
Spare parts
Only parts ordered at or approved by Wahlberg should be used in the Mini Roll Down to ensure
product function and stability. Contact Wahlberg to inquire about spare parts.
On-site service
On-site service and maintenance can be provided by the Wahlberg Motion Design, giving owners
access to Wahlberg Motion
Design’s
expertise and product knowledge in a partnership that will
ensure the highest level of performance throughout the
product’s lifetime. Please con
tact
Wahlberg Motion Design for details.
Maintenance plan
The results of all the regular inspections are to be documented and kept available at the company.
The written result of the last inspection must be kept available at the site of operation, e.g. by an
inspection sticker on the Mini Roll Down showing the date of the inspection, the basis of the
inspection and the name of the inspector.
Before every use and weekly
Every time when rigging the Mini Roll Down, before running the Mini Roll Down
–
and at least
every week when the Mini Roll Down is in use:
−
Check that the fabric is winded neatly on the drum.
Monthly
At regular intervals
–
but at least every month when the Mini Roll Down is in use:
−
Check the mounting clamp and snap hook for damages and proper fastening.
−
Change damaged parts according to this manual.
Yearly
The Mini Roll Down has to be inspected by a specialist every 12 months.
Every 48 months
The Mini Roll Down should be inspected by an authorised expert every 48 months.
