12 •
Installation
Fieldbus Dependent I/O Module
PROFIBUS DP
4.1.2 Insertion/Extraction of the Electronic Module
The electronic module is plugged onto the base module.
Attention
Remove power from the base module before installing the electronic module.
Apply force at the positions marked “PUSH” when plugging in the electronic
module.
PROFIBUS
RUN
BF
OVERLOAD
PUSH
PUSH
WAGO-I/O-SYSTEM 752 16DI/16DO
752-323
012
3456
78
9
012
3456
78
9
x10
x1
INPUT
9 10 11 12 13 14 15 16
1 2 3 4 5 6 7 8
INPUT
9 10 11 12 13 14 15 16
1 2 3 4 5 6 7 8
OUTPUT
1 2 3 4 5 6 7 8
1 2 3 4 5 6 7 8
9 10 11 12 13 14 15 16
9 10 11 12 13 14 15 16
Fig. 4-3: Plugging in the electronic module
g1x2302x
The electronic module is correctly inserted when all four latches have en-
gaged.
PROFIBUS
RUN
BF
OVERLOAD
PUSH
PUSH
WAGO-I/O-SYSTEM 752 16DI/16DO
752-323
012
3456
78
9
012
3456
78
9
x10
x1
INPUT
9 10 11 12 13 14 15 16
1 2 3 4 5 6 7 8
INPUT
9 10 11 12 13 14 15 16
1 2 3 4 5 6 7 8
OUTPUT
1 2 3 4 5 6 7 8
1 2 3 4 5 6 7 8
9 10 11 12 13 14 15 16
9 10 11 12 13 14 15 16
Latch
Latch
Fig. 4-4: Extracting the electronic module
g1x2303e
The electronic module can be extracted by pressing the 4 latches and simulta-
neously pulling it from the base module.
4.1.3 Marking Label
The plastic marking label can be removed from the mounting points by ap-
plying slight finger force. To accomplish this, slide the label from one side
such that the label bends.
Insert the label by proceeding in the reverse order.
