smart
PRINTER Operating Instructions
smart
PRINTER Operating Instructions 003/10.2017
33
7.2.4
Cutter
The cutter was developed to cut WAGO print material.
The cutter is a
smart
PRINTER accessory and is for use with this material only. The following
information will support you in operating the cutter. Only use print material approved to cut by WAGO.
The cutter does not contain any parts that need to be serviced by the user. Do not open the
enclosure. Do not insert objects through the labels bay in the cutter unit.
Warning against high voltage
Disconnect the printer from the power supply before starting any installation work.
The increasing number of built-in products on a DIN rail leads to tolerance-related
deviations in the overall length.
Cuttings should not exceed a length of
39,37” (1000 mm).
Cuttings should not below a length of
1,18” (30 mm).
If printer/accessories and operating software are operated in separate rooms, check the printer for
errors after each print job.
Description
Type plate information
Item No. :
258-5030
Serial number:
GWA0010716
Year of manufacture
Month of manufacture
Serial production number
Manufacturer's label
Manufacturer and support address
Technical data
Dimensions
Altitude
4,20“
Length
5,15“
Width
2,40“
Weight
1,060 kg
Nominal Voltage
24 DCV
Ambient operating
temperature
During operation
+32°F … +104°F
During transport/storage
+14
°F … +140°F
Ambient humidity
During operation
20 to 85 %, relative humidity, non-condensing
During transport/storage
10 to 90 %, relative humidity, non-condensing
Print material
Max. width
1,81
“
Max. thickness
250 µm
Enclosure
Labels bay
Warning symbol
Fixing lugs
Motor and cutter
assembly
PCB
Plugs
Support plate
