manualshive.com logo in svg

WAGO smartPRINTER, Operating Instructions Manual

Share
Download
WAGO smartPRINTER Operating Instructions Manual Download Page 21

smart

PRINTER Operating Instructions                                                

 

  

smart

PRINTER Operating Instructions 003/10.2017

 

21 

 

6.5.8 

Using Markers/WMB Inline 

The following information will help you use you 

smart

PRINTER safely. 

The details of the graphical illustrations may differ from those of the current model.  
 
Insert markers on the roll in the external unwinder. 

 
Important: Unrolling direction to the left! 
The markers are fed into the printer in a counter-clockwise direction. 

 
Position external unwinder with the print material behind the printer. 
 

Important: The external unwinder with the print material on the roll is positioned in such a way 

that the print material that is unwinding and material that is fed through the printer form an 
imaginary line! 
 

If the printer and print material in the external unwinder are not aligned with each other, this 
leads to errors in the transport of the print material and the printed image. 

 

 

Open the 

smart

PRINTER. Tilt the top of the printer (print mechanism and housing cover) up 

until it locks firmly in place. 

 

Push the print material into the printer through the feed-through hole on the back of the 
printer. 

 

Adjust the media guide to the width of the markers. 

The print material bulges if the media guide is set too narrow. 
The print material escapes from the media guide if it is set too wide. 
An incorrectly adjusted media guide leads to errors in the transport of the print 
medium and the printed image. 

 

Feed the markers through under the hold-down device and the media guide. 

 

Align the markers exactly to the roller guide groove. 

 

Pull the markers out of the printer in the direction of the print roller. 

 

Close the 

smart

PRINTER. 

 

 

 

 

 

Summary of Contents for smartPRINTER
















































Reviews:

No comments

Brands by name

Popular brands

Load more brands