WAGO I/O-SYSTEM 750 Page 7 User Manual Download

Page: 7 / 96

WAGO-I/O-SYSTEM 750

Notes about this Documentation

750-493 3-Phase Power Measurement Module

Manual

Version 1.2.0

Table 2: Revision History

Document

Version

Device Version

Description of Change

Hardware Software

1.0.1

‒

First issue

1.1.0

≥ 20

≥ 01

Total revision with new layout

1.2.0

≥ 20

≥ 01

Variants

750-493

/025-000 and

750-493

/025-

001 for extended temperature range added.

Pos: 16.1 /All e Seri en ( Allgemei ne Module)/Hi nweise zur D okumentati on/Urheberschutz ausführlich @ 4\mod_1235565145234_21.docx @ 27691 @ 2 @ 1

1.3

Copyright

This Manual, including all figures and illustrations, is copyright-protected. Any

further use of this Manual by third parties that violate pertinent copyright

provisions is prohibited. Reproduction, translation, electronic and phototechnical

filing/archiving (e.g., photocopying) as well as any amendments require the

written consent of WAGO Kontakttechnik GmbH & Co. KG, Minden, Germany.

Non-observance will involve the right to assert damage claims.

Pos: 16.2 /Dokumentation allgemei n/Glieder ungselemente/---Seitenwechsel--- @ 3\mod_1221108045078_0.docx @ 21810 @ @ 1

Summary of Contents for I/O-SYSTEM 750

































































































Search results

Summary of Contents for I/O-SYSTEM 750

Reviews:

Related manuals for I/O-SYSTEM 750

Brands by name

Popular brands

WAGO I/O-SYSTEM 750, User Manual

Search results

Summary of Contents for I/O-SYSTEM 750

Reviews:

Related manuals for I/O-SYSTEM 750

Brands by name

Popular brands