manualshive.com logo in svg

WAGO EPSITRON 787-1675, Manual, Page: 25 / 40

Share
Download
WAGO EPSITRON 787-1675 Manual Download Page 25

EPSITRON® 

Device Description 

25 

787-1675 Switched-Mode Power Supply with Integrated UPS Charger and Controller 

 

 

Manual 

 

Version 1.0.0  

 

 

Pos: 36 /All e Seri en ( Allgemei ne Module)/Ü berschriften für alle Serien/Gerätebeschr eibung/Nor men und Richtlini en -  Überschrift 2 @ 4\mod_1242804031875_21.doc @ 33646  @  2 @ 1 

 

3.7 

Standards and Guidelines 

Pos: 37 /Serie 787 (EPSITRON)/Ger ätebeschrei bung/N ormen und Richtli nien/N ormen und Richtli nien U nterbrechungsfreie Stromversorgung 787- xxxx,  ohne Variantenangabe - Ei nl @ 13\mod_1347519108515_21.doc @ 102694 @  @ 1 

 

 

The uninterruptible power supply system 787-1675 complies with the following 

standards and guidelines: 

Pos: 38 /All e Seri en ( Allgemei ne Module)/N or men und Richtli nien/Sicherheit: DIN EN 61204:2000 @ 13\mod_1346665870671_21.doc  @ 102249 @  @ 1 

 

Low-voltage power supplies, 

  

IEC 61204-3:2000 

DC output 

Part 3: Electromagnetic 

compatibility (EMC) 

Pos: 39 /All e Seri en ( Allgemei ne Module)/N or men und Richtli nien/Sicherheit: DIN EN 61558- 2-16:2009 @ 13\mod_1346665322780_21.doc @ 102246 @  @ 1 

 

Safety of transformers, reactors, 

 

IEC 61558-2-16:2009 

power supply units and similar 

products for supply voltages up to 

1100 V – 

Part 2-16: Particular requirements and 

tests for switch mode power supply 

units and transformers for switch mode 

power supply units 

Pos: 40 /All e Seri en ( Allgemei ne Module)/N or men und Richtli nien/Sicherheit: DIN EN 60950- 1:2006 @ 13\mod_1346664940957_21.doc @ 102243 @  @ 1 

 

Information technology 

 

IEC 60950-1:2009 

equipment – 

Safety – 

Part 1: General requirements 

Pos: 41 /All e Seri en ( Allgemei ne Module)/N or men und Richtli nien/EG-EM V-Richtlini e 2004/108/EG @ 7\mod_1274262373820_21.doc @ 56628  @   @  1 

 

EC EMC Directive 

 

 

 

2004/108/EC 

Pos: 42 /All e Seri en ( Allgemei ne Module)/N or men und Richtli nien/EG-Niederspannungsrichtlini e 2006/ 95/ EG @ 7\mod_1274262383272_21.doc @ 56632 @  @ 1 

 

EC Low Voltage directive (LVD) 

  

2006/95/EC 

Pos: 43 /D okumentation allgemei n/Glieder ungselemente/---Seitenwechsel--- @ 3\mod_1221108045078_0.doc @  21810 @  @ 1 

 

Summary of Contents for EPSITRON 787-1675









































Reviews:

No comments