manualshive.com logo in svg

WAGO EPSITRON 787-1675, Manual, Page: 13 / 40

Share
Download
WAGO EPSITRON 787-1675 Manual Download Page 13

EPSITRON® 

Device Description 

13 

787-1675 Switched-Mode Power Supply with Integrated UPS Charger and Controller 

 

 

Manual 

 

Version 1.0.0  

 

 

Pos: 15 /All e Seri en ( Allgemei ne Module)/Ü berschriften für alle Serien/Gerätebeschr eibung/Gerätebeschr eibung - Ü berschrift 1 @ 3\mod_1233756084656_21.doc @ 27096 @ 1 @ 1 

 

3 

Device Description 

Pos: 16.1 /Serie 787 (EPSITRON)/Ger ätebeschrei bung/Beschr eibung/Anwendung/Anwendung 787-1675 @ 13\mod_1342439897257_21.doc @ 100336 @  @ 1 

 

 

The switched-mode power supply with integrated ups charger and controller 787-

1675, in the following named as uninterruptible power supply system (UPS), 

ensures that power is always supplied. If the mains power is lost, all of the 

electrical loads connected to the system will continue to operate reliably. 

Pos: 16.2 /Serie 787 (EPSITRON)/Ger ätebeschrei bung/Beschr eibung/F unkti on/Funkti on 787-1675: Funktionsei nheiten @ 13\mod_1342599274535_21.doc @ 100540 @  @ 1 

 

 

The system consists of two function units: 

• 

an AC/DC power supply unit with an integrated charger and controller and 

• 

a 24V DC battery module for buffering (not included in the scope of 

supply). 

Pos: 16.3 /Serie 787 (EPSITRON)/Ger ätebeschrei bung/Beschr eibung/F unkti on/Funkti on 787-1675: Wirkungsweise der Komponenten  @ 13\mod_1342600188912_21.doc @ 100544 @  @ 1 

 

 

All of the components that can be used to set up an uninterruptible power supply 

system are optimally matched to and compatible with one another. These 

components can be quickly installed and are immediately ready for operation. 

Any 787-87x Series battery modules that are connected to the system are detected 

automatically by the UPS. 

 

 

 

Battery module not included in the scope of supply! 

The scope of supply for this device does not include the battery module. The 

device will only continue to operate properly when at least one battery module is 

connected. The WAGO range of products includes compatible 

EPSITRON

®

 787-

87x Series battery modules. 

 

The system can also be integrated into an existing topology via several signaling 

contacts and a serial interface. 

Critical operating states are signaled at an early stage, before the 24 V system 

power collapses and the device shuts down. 

Pos: 17 /D okumentation allgemei n/Glieder ungselemente/---Seitenwechsel--- @ 3\mod_1221108045078_0.doc @  21810 @  @ 1 

 

Summary of Contents for EPSITRON 787-1675









































Reviews:

No comments